FERROFISH
PULSE16 MX

16 x 16 AD/DA <> MADI <> ADAT Converter

High quality MADI converter. Flexible and affordable

The PULSE16 MX offers maximum performance at affordable cost. In addition to the studio-quality 16 x 16 balanced analog inputs and outputs up to 192kHz, the PULSE16 MX offers both ADAT and MADI – probably the most widely used digital audio interfaces available. Up to 64 x 64 channels (or 16 x 16 channels at 192kHz) can be transmitted over a simple optical MADI cable pair, so high-end multichannel recording is not a problem. Besides, numerous ADAT channels are provided: At 96kHz, 4 x 4 ADAT ports transfer 16 x 16 channels.

Packed in a just 1HU, this highly integrated converter has 16 x 16 balanced analog TRS sockets using studio levels up to +20dBu – individually adjustable in 1dB steps. The Low Latency Cirrus Logic converters, accompanied with a temperature-compensated clock and jitter reduction PLL, guarantees best crystal clear sound.

The 4 x 4 ADAT ports deliver enough bandwidth to convert all 16 x 16 analog signals at 96kHz, or even 32 x 32 channels at 48kHz. MADI adds another 64 x 64 channels, and is implemented using a modular SFP conection to offer different MADI standards (like Singlemode). Just replace the MADI module by a different model.

Configuring the device is a breeze thanks to the two TFT screens. No need to consult the manual, every information is displayed clearly on the screens. Remote control via MIDI and MADI is also possible.

The headphone can be connected to any analog or digital input or output: ideal for control or monitoring.

The fanless, compact 1HU device is the ultimate choice, when high-end conversion is needed – thanks to the elaborated design the PULSE16 MX is the center device for your equipment.

Seamless analog / ADAT / MADI integration for recording, broadcast and live sound.

MADI Interface

The Pulse16 MX has a modular MADI interface: The MADI SFP slot is equipped with an optical LC multimode module, which can be replaced, for example, by a Singlemode module. In addition to the 64 x 64 audio channels, a MIDI signal is also embedded, which can be used for device control and for routing to the MIDI interfaces.

Dual TFT Display

Keep track of all 32 analog channels at any time: Everything is shows clearly on two TFT screens. Status information and all functions are presented clearly and intuitively, so no need to consult the manual anymore. Gone are the days of blinking LED‘s and incomprehensible operation!

Internal Routing Matrix

All 176 x 176 analog and digital channels of the Pulse16 MX are brought together in groups of 8 using the internal routing matrix. For easy monitoring, any channel, mono or stereo, can be selected for headphone output.

Ferrofish Pulse16

PULSE16 MX SPECIFICATIONS

CONNECTIVITY

  • 16 x 16 Balanced TRS balanced analog I/O, max 96kHz (192kHz with MADI option), Gain/Levels: -8dBu…+20dBu (1dB steps)
  • 4 x 4 ADAT I/O, each ADAT port transfers eight channels at a sample rate of 48kHz (= 32 In + 32 Out)
  • MADI SFP Port, SFP MADI module with optical LC connector (Multimode).
    Singlemode Module optional.
  • Phones Stereo TRS, Monitoring of every stereo/mono I/O via an additional stereo DAC
  • Word Clock I/O
  • MIDI I/O

MADI I/O (AES10)

SFP port for MADI optical Multimode (included) or Singlemode (optional) SFP module

  • 64 channels @32kHz, 44.1kHz, 48kHz
  • 32 channels @64kHz, 88.2kHz, 96kHz
  • 16 channels @128kHz, 176.4kHz, 192kHz

Support of MIDI over MADI.
Latency: 2 samples

  • SMUX4 with 192 kHz operation
  • Delay-compensation for MADI chain
  • MIDI over MADI Preset Management

Analog In- and Outputs

2 x 24Bit A/D Converter
16 x TRS ¼” (6.3mm), female
  • Digital gain: +20dBu … -8dBu, 1dB steps
  • Digital gain (+24dBu Option): +24dBu … -4dBu, 1dB steps

ADAT I/O

4+4 optical ports (8 channels each with 48 kHz)

  • 16 channels @32kHz, 44.1kHz, 48kHz
  • 16 channels @64kHz, 88.2kHz, 96kHz
  • 8 channels @128kHz, 176.4kHz, 192kHz (SMUX4 – only with installed MADI MX option)

Latency: 2 samples

MIDI I/O

  • 2 x DIN5 connector for remote control of the unit
  • Conversion MIDI <> MIDI over MADI possible (MADI MX option required)

Wordclock I/O

  • BNC: 1 x input, 1 x output
  • 75 Ohm Termination switchable for input

Power Supply

12V, 3A

  • 1 x input jack with screw lock.
  • Power required: 12VA in operation, 0,1VA in standby mode (Efficiency Level VI)
  • Internal resettable polyfuse
  • 1 x power supply included

OPTIONS

CV Out Option*
Allows the output of DC voltage at the analog outputs of the Pulse16. This allows control voltages (CV) to be generated via a CV plugin in a DAW, allowing modular systems to be controlled from the analog outputs.

+24dBu Option*
This option raises the maximum input and output level of the 16 analog inputs and outputs from +20dBu to +24dBu, which then complies with the SMPTE standard.

*Please note that these are BTO (built-to-order) options which cannot be retrofitted.

Ferrofish PULSE16 MX

16 x 16 AD/DA <> MADI <> ADAT Converter

MORE FROM FERROFISH

Ferrofish A32pro

Ferrofish A32pro

The A32pro is based on a new modular hardware platform and packed with analog and digital interfaces. In addition to the 32×32 balanced studio-quality analog inputs and outputs and the stereo main out up to 192kHz, the A32pro offers both ADAT and MADI –…
Ferrofish A32pro Dante

Ferrofish A32pro Dante

The A32pro Dante is connecting digital and analog audio to the world of Dante: All interfaces, whether analog, MADI or ADAT, are brought using the integrated routing matrix into the Dante network. The A32pro Dante is not just a converter – it’s also the…
Ferrofish Pulse 16 DX

Ferrofish Pulse16 DX

The PULSE16 DX is much more than a 16 x 16 channel AD / DA converter. In addition to studio-grade analog inputs and outputs up to 192kHz, the PULSE16 DX offers an impressive number of digital interfaces, ready for any task. All equipment, whether analog,…
Ferrofish Pulse 16

Ferrofish Pulse16

The PULSE16 converts 16 x 16 studio-grade balanced analog inputs and outputs up to 96kHz to ADAT I/O. As a cost-effective and mature interface, ADAT is already available almost everywhere – so expanding your studio with the PULSE16 by 16 x 16 analog channels…

MusicNetwork offers consulting, training and support services to complement its wide range of products. Our staff is experienced in working with professional audio hard- and software.

EXLPORE NOW

Das breite Sortiment von MusicNetwork wird durch verschiedene Dienstleistungen wie Beratung, Schulung und Support ergänzt. Unsere Mitarbeiter verfügen über langjährige Erfahrung im Umgang mit professioneller Hard- und Software für den Audio-Bereich.

EXLPORE NOW
0

COMPANY

MusicNetwork AG

Seestrasse 93, 8810 Horgen

+41 44 454 20 30

COMPANY

MusicNetwork AG

Seestrasse 93, 8810 Horgen

+41 44 454 2030

COPYRIGHT © 2000 - 2024 MUSICNETWORK AG
ALL RIGHTS RESERVED.

MusicNetwork AG