UNiKA PRO-BT5

UNIKA PRO-BT5

UNiKA PRO-BT5 is a professional passive DI box designed to convert wireless digital Bluetooth audio signals such as those from mobile phones, tablets, laptops, computers and other digital audio sources into low impedance balanced analog signals as required by a mixing console, sound card, preamplifier or powered speaker. The PRO-BT5 is powered by a commercial external 5V DC power supply (not included).

The UNiKA PRO-BT5 Bluetooth 5.0 receiver module is certified by the SIG Bluetooth International Association for wireless reception of SBC and AAC signals with a transmission range of 30-35 meters and 16 bit / 44.1 kHz (CD quality). The PRO-BT5-headphone amplifier is capable of handling even the most demanding headphones and earphones with high and low impedance for private and professional use.

UNiKA PRO-BT5

Features

  • CIRCUIT PRINCIPLE: Passive with transformer-balanced output
  • BLUETOOTH VERSION: Ver. 5.0 A2DB Dual Mode with BLE and DID listing
  • D/A CONVERSION: 16 bit / 44.1 kHz
  • SYNC FORMATS: SBC and AAC according to A2DP decryptions
  • POWER SUPPLY: via external 5VDC power supply type USB-C, LED status indicator
  • BLUETOOTH SYNC STATUS: LED
  • OUTPUT CONNECTION: 2 XLRm jack, balanced, isolation transformer
  • OUTPUT GROUNDLIFT: via switch
  • OUTPUT IMPEDANCE: 50 ohms
  • MAXIMUM OUTPUT VOLTAGE: 0.99Vrms
  • HEADPHONE OUTPUT POWER: 30 mW @ 32ohms per channel / 5 mW @ 600 ohms per channel
  • FREQUENCY GAIN: 20 Hz - 20 kHz, ±0.5dB
  • S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 110 dB
  • THD @ 1 KHZ, 0 dB OUTPUT: < 0.005%
  • TRANFORMATOR TYPE: 1+1:1+1
  • HOUSING: 1.6 mm / 1.2 mm steel
  • FINISH: Scratch-resistant paint
  • DIMENSION (W X D X H): 78 x 124 x 46 mm
  • WEIGHT: 0.61 kg

FEATURES

  • CIRCUIT PRINCIPLE: Passive with transformer-balanced output
  • BLUETOOTH VERSION: Ver. 5.0 A2DB Dual Mode with BLE and DID listing
  • D/A CONVERSION: 16 bit / 44.1 kHz
  • SYNC FORMATS: SBC and AAC according to A2DP decryptions
  • POWER SUPPLY: via external 5VDC power supply type USB-C, LED status indicator
  • BLUETOOTH SYNC STATUS: LED
  • OUTPUT CONNECTION: 2 XLRm jack, balanced, isolation transformer
  • OUTPUT GROUNDLIFT: via switch
  • OUTPUT IMPEDANCE: 50 ohms
  • MAXIMUM OUTPUT VOLTAGE: 0.99Vrms
  • HEADPHONE OUTPUT POWER: 30 mW @ 32ohms per channel / 5 mW @ 600 ohms per channel
  • FREQUENCY GAIN: 20 Hz - 20 kHz, ±0.5dB
  • S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 110 dB
  • THD @ 1 KHZ, 0 dB OUTPUT: < 0.005%
  • TRANFORMATOR TYPE: 1+1:1+1
  • HOUSING: 1.6 mm / 1.2 mm steel
  • FINISH: Scratch-resistant paint
  • DIMENSION (W X D X H): 78 x 124 x 46 mm
  • WEIGHT: 0.61 kg
UNiKA PRO-BT5

UNiKA PRO-BT5 is equipped with a UNiKA-PRO™ EI30A10E 1+1: 1+1 isolation transformers equipped, which has a special copper foil layer and a dedicated grounding layer making this device have a high signal-to-noise ratio and a  dynamic sound restore and avoid unnecessary losses due to high frequency interference, grounding interference and potential differences can be achieved.

UNIKA
PRO-BT5

BLUETOOTH 5.0 DI BOX

UNIKA
PRO-BT5

BLUETOOTH 5.0 DI BOX

MORE FROM UNIKA PRO

UNiKA PRO-MMD

UNiKA PRO-MMD

UNiKA PRO-MMD is a professional passive DI box designed to match electronic devices with unbalanced line outputs such as music players, media players, computers, tablets and phones to professional balanced low impedance inputs such as on mixing consoles,…
UNiKA PRO-248

UNiKA PRO-248

UNiKA PRO-248 is a professional active two-channel DI box that connects electric and electroacoustic guitars, basses, effects pedals and other high impedance sources to the balanced microphone inputs of a mixing console or external microphone preamplifier.
UNiKA PRO-ONE

UNiKA PRO-ONE

UNiKA PRO-ONE is a professional passive DI box designed to connect electronic equipment with line-level outputs such as keyboards, drum machines, Drum Pads and DJ Equipment to balanced low impedance inputs such as those from mixers, external microphone…
UNiKA PRO-TWO

UNiKA PRO-TWO

The UNiKA PRO-TWO is a professional passive two-channel DI box designed to connect line-level output electronic equipment such as keyboards, drum machines, drum pads, and DJ equipment to balanced low-impedance inputs such as mixing consoles, external…

MusicNetwork offers consulting, training and support services to complement its wide range of products. Our staff is experienced in working with professional audio hard- and software.

EXLPORE NOW

Das breite Sortiment von MusicNetwork wird durch verschiedene Dienstleistungen wie Beratung, Schulung und Support ergänzt. Unsere Mitarbeiter verfügen über langjährige Erfahrung im Umgang mit professioneller Hard- und Software für den Audio-Bereich.

EXLPORE NOW
0

COMPANY

MusicNetwork AG

Seestrasse 93, 8810 Horgen

+41 44 454 20 30

COMPANY

MusicNetwork AG

Seestrasse 93, 8810 Horgen

+41 44 454 2030

COPYRIGHT © 2000 - 2024 MUSICNETWORK AG
ALL RIGHTS RESERVED.

MusicNetwork AG