Ferrofish
VERTOpro 64
64 x 64-Channel ADAT< > DANTE Converter
The system provides the utmost digital connectivity, offering up to 64×64 ADAT channels at 48 kHz and 64×64 Dante channels with AES67 support. It also supports secure, redundant, or switched network operation. Connectivity can be expanded via two optional MADI SFP slots. This enables dual MADI streams, redundant connections, and direct cross-routing between MADI, Dante, and ADAT at sample rates of up to 192 kHz.
The 3-inch IPS color display on the front panel provides direct and intuitive control. The display shows level meters, routing, clocking, and device status in real time. A flexible routing matrix is available for signal management, offering both fast 8-channel block routing and precise single-channel routing. Front-panel headphone monitoring allows you to monitor any digital input or output signal directly without affecting the existing routing.
Other practical features include eight internal preset slots, a device lock to prevent accidental changes, and comprehensive remote control via RemoteFish software (Windows/macOS) using USB-C or MIDI Control Change commands.
MADI functionality can be enabled via two MADI SFP slots, an optional MADI license, and compatible Ferrofish MADI SFP modules.
Full control. Right on the device.
The VERTOpro can be configured directly via the front panel. The high-resolution, 3-inch, IPS color display shows level meters, time, interface status, routing information, and device configuration access.
The internal routing matrix allows signals to be freely routed between Dante, ADAT, and, when the optional MADI function is enabled, MADI. Routing can be performed quickly in blocks of eight channels or individually per channel.
Optional Dual-MADI connection
The VERTOpro 64 is equipped with two MADI-SFP slots. MADI functionality can be enabled with an optional MADI license and compatible Ferrofish MADI-SFP modules.
The two MADI connections can then be used as follows:
- Two independent MADI streams
- A redundant MADI connection
- MADI-to-MADI routing
- MADI-to-Dante routing
- MADI-to-ADAT routing
Available Ferrofish MADI SFP options:
- Multimode fiber – up to 2 km
- Single-mode fiber – up to 10 km
- Coaxial cable – up to 100 m
Technical Specifications: VERTOpro 64
Dante I/O
- 64 × 64 @ 48 kHz
- 32 × 32 @ 96 kHz
- 16 × 16 @ 192 kHz
- 2 × RJ45 Gigabit
- Switched and Redundant modes
- AES67
General
- 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
- Half 19-inch, 1U enclosure
MADI
- 2 SFP slots
- 64- and 56-channel modes
USB-C
- USB-C MIDI
Headphone
- 6.3 mm jack
- ESS ES9023 DAC
- 4 gain settings
Package Contents
- Device
- PSU
- Manual
MIDI I/O
- 3.5 mm TRS MIDI Type A In / Out
- RemoteFish
- MIDI CC
Power Supply
- 12 V DC / 3 A
- Locking connector
- Internal self-resetting polyfuse
ADAT I/O
- VERTOpro 32: 8 × ADAT IN / 8 × ADAT OUT
- SMUX 1/2/4
- SMUX support up to 192 kHz
Wordclock I/O
- BNC In / Out
- Switchable 75 Ω termination
Environmental
- +5 °C to +45 °C
- <75% RH, non-condensing
Weight/Size
- 220 × 135 × 44 mm
- Weight: 1 kg