UNIKA NBB-04T
The NBB-04R and NBB-04T are extremely flexible audio interfaces that use Audinate Dante network technology for audio transmission. Each NBB-04R / NBB-04T has two Ethernet ports that allow you to cascade multiple NBB-04s.
The NBB-04T sends 4 analogue audio channels that are converted into a Dante network audio stream by other Dante-enabled devices.
- Dante-enabled networked Audio Receiver (NBB-04R) and Transmitter (NBB-04T)
- Streaming audio in robust standard Ethernet cable
- Easily organize and expand network topology with Ethernet switches
- Uncompressed 24-bit PCM coding with sample rate up to 96KHz
- Two RJ-45 ports make Daisy-chain cascading feasible
- Powered by either PoE or 48V adapter
- Gain or Attenuate control for each channel
- Phantom power engagement control per channel (NBB-04R)
- A signal clip indicator for all inputs (NBB-04R)
- XLR Combo sockets for both XLR and phone plugging (NBB-04R)
- Routing and other configuration are set with Dante Controller software
Audio routing between the UNiKA boxes and all other Dante-enabled devices is configured via a computer with dedicated Dante Controller software, available free of charge from the Audinate website. With the Dante Virtual Soundcard software, you can use the NBB-04R / NBB-04T together with your DAW software for direct recording / playback of multitrack audio. The units are powered via an external power supply (48V) or via an Ethernet switch (PoE).
The audio input / output interfaces of the NBB-04R / NBB-04T meet the requirements of the professional audio industry. The audio signal is encoded / decoded uncompressed via 24-bit PCM converters with a sampling rate of 44.1 kHz, 48 kHz or 96 kHz. The electronically balanced NBB-04T outputs, which can also be adjusted on the unit, provide a signal voltage of up to 24 dBu.
The inputs of the NBB-04R can be driven with line or microphone level and can also be levelled at the unit. They also have phantom power and a clip indicator.
The audio input / output interfaces of the NBB-04R / NBB-04T meet the requirements of the professional audio industry. The audio signal is encoded / decoded uncompressed via 24-bit PCM converters with a sampling rate of 44.1 kHz, 48 kHz or 96 kHz. The electronically balanced NBB-04T outputs, which can also be adjusted on the unit, provide a signal voltage of up to 24 dBu.
The inputs of the NBB-04R can be driven with line or microphone level and can also be levelled at the unit. They also have phantom power and a clip indicator.
UNIKA NBB-04T
DANTE OUTPUT INTERFACE
UNIKA NBB-04T
DANTE OUTPUT INTERFACE
