|
Designed as wide application high quality studio microphone. The Wedge uses new compacted large size true electrostatic single diaphragm cardioid capsule, providing high output and full audio spectrum of sound. Transducer capsule is internally damped from vibrations and resonances. Acoustic open long double mesh head provides new level of sound transparence and naturalness. The optional original construction double cone metal mesh external studio pop filter effectively protects diaphragm from plosive sounds, breath and pop noise using microphone on vocals and speech. The Wedge comes with stand holder, but is ready for three different construction optional studio shock mounts for additional protection from external subsonic interference.
Specifications
- Transducer type: True electrostatic
- Operating principle: Pressure gradient
- The diaphragm’s active diameter: 21 mm (0.8”)
- Frequency range: 20 Hz to 20 kHz
- Polar pattern: Unidirectional - cardioid
- Electronics type: Discrete, solid state
- Output impedance: 50 ohm
- Rated load impedance: 1000 ohm
- Suggested load impedance: >250 ohm
- Sensitivity at 1 kHz into 1 kohm load: 25 mV/Pa
- S/N Ratio CCIR 468-3 weighted: 77 dB
- S/N Ratio DIN/IEC 651 A-weighted: 88 dB-A
- Equivalent noise level DIN/IECA-weighted: 6 dB-A
- Maximum SPL for 0.5% THD at 1 kohm load: 136 dB
- Dynamic range of the microphone preamplifier: 130 dB
- P48 Phantom powering IEC 268-15A: +40 to +52 V on XLR pins #2 & #3
- relatively pin #1
- Phantom current consumption: <1.5 mA
- Output connector: 3-pin XLR male, gold plated contacts
- Signal polarity: Positive toward pressureon a diaphragm produces positive polarity voltage on XLR's pin#2 relatively to pin #3
- Dimensions, weight: 210 mm x 42 mm / shaft D24 mm, 350 g
|
