Ecox

ECOX can reproduce typical band echo sounds particularly well, including the system-dependent tracking fluctuations and loss of highs during each feedback. Like the CORVEX the internal feedback has a two-band filter (low and high-cut) that can be used to create dark, high or mid repetitions depending on the settings.
A particular characteristic of ECOX is that the delay cannot be distorted 'digitally'. Even in a 'looped' repetition the signal can not be distorted indefinitely but compressed by an increasingly slight degree and distorted similar to a tape.

Filtox

As CORVEX and ECOX, FILTOX is a 'modulation effect'. However it only controls the frequency response of a modulation source. Possible areas of application are synthesizer sounds (filter sweeps on pads) or creative distortions of drum loops (e.g. for variations, fills, etc). With guitars you can create typical 'wah' effects: either by tempo modulation or in a special mode, modulation via the envelope curve.
The 'core' of FILTOX is a stereo multimode filter based on an analogue model (Chamberlin 2-pole filter), which, for example, is known as an 'Oberheim' filter. With FILTOX two such modules were cascaded per channel to achieve a switchable 24dB slew rate.

Minimum System Requirements

• CPU speed 1.5 GHz
• 512 MB RAM
• Free hard disk space: 5 MB
• Graphics card: Min. resolution 1024x768 with 16-bit high-color
• 16-bit sound card
• CD-ROM drive

For Microsoft®· Windows® 2000/XP