|
The Pearl Vocal uses true electrostatic single diaphragm cardioid capsule, providing full audio spectrum. Capsule is internally shock-mounted. Internal cone type pop filter
effectively protects diaphragm from plosive sounds. The microphone is designed for handheld or stage stand use on supplied holder. It can be mounted on optional external studio shock mounts for additional protection from external subsonic interference. Optional Reflection Ring adds warmth, reduces feedback and protects against wrong handheld use of microphone.
Specifications
- Transducer type: True electrostatic
- Operating principle Pressure gradient
- The diaphragm’s active diamete 21 mm (0.8”)
- Frequency range 20 Hz to 20 kHz
- Polar pattern Unidirectional - cardioid
- Electronics type Discrete solid state (SS)
- Output impedance 50 ohm
- Rated load impedance 1000 ohm
- Suggested load impedance >250 ohm
- Sensitivity at 1 kHz into 1 kohm load 12 mV/Pa
- S/N Ratio CCIR 468-3 weighted 70 dB
- S/N Ratio DIN/IEC 651 A-weighted 80 dB-A
- Equivalent noise level DIN/IEC A-weighted 14 dB-A
- Maximum SPL for 0.5% THD at 1 kohm load 144 dB
- Dynamic range of the microphone preamplifier 130 dB
- P48 Phantom powering IEC 268-15A +40 to +52 V on XLR pins #2 & #3 relatively pin #1
- Phantom current consumption <1.5 mA
- Output connector 3-pin XLR male, gold plated contacts
- Signal polarity Positive toward pressureon a diaphragm
- produces positive polarity voltage on
- XLR's pin #2 relatively to pin #3
- Dimensions, weight 207 mm x 42 mm / shaft 24 mm, 250 g
|
