PATCH IT!

On the front panel, 8 alpha-numeric LED displays show the current signal source for every output separately. With two push buttons per channel, any signal source can be changed quickly. Besides input 1 to 8, input 0 (no input) can be chosen as well. The front panel has eight fixed output fields. This clarifies the way the MADI Bridge operates. An output can be fed by any input, multiple outputs even by the same input. This way the device can be used as a distributor. But it's not possible to route more than one input to one output. This would equal the functionality of a digital mixing desk.
Above each configuration field, an empty label area allows to attach a tape to each output, with the name of the connected device. With this, the routing stays clear and easy to understand, even when all I/Os are in use. The Lock section allows both locking the keys on the device and locking the MIDI remote. This way the device can be secured against accidental operating errors. The device stores the last settings when being switched off and offers 9 free memories for presets. Memory 0 is pre-configured as panic button, it cancels all connection points. RME's love for professional details can be seen here as well: a preset is pre-selected first, and then recalled with the Recall button. As soon as one of the routings is being changed, both the changed output and the preset number show a dot in the display. The first class front panel display is being rounded off by a 64 LED matrix field. All routings are displayed here in classical matrix view, a configuration can be viewed and understood in a glance. The matrix field is especially valuable for pre-selection of the presets, because the preset's routing is displayed in the matrix before recall. The rear of the MADI Bridge looks clear and tidy. Six coaxial BNC inputs and outputs each, two optical inputs and outputs and two DIN MIDI jacks offer superior flexibility and compatibility. The MADI Bridge is compatible to MADI interfaces from Sony, Merging, Lawo, Euphonix, Stagetec, Jünger, Audio Service, Soundtracs, AMS and others.

REMOTE CONTROL

Of course the MADI Bridge can be remote controlled via MIDI. Also all controls and LEDs on the front plate - the complete status - can be read via MIDI. Each MADI Bridge can be programmed with its own ID, providing a separated remote control of multiple devices via a single MIDI channel. The Windows software MIDI Remote can be downloaded for free from the RME website. It can use any existing MIDI port within the system to perform remote control and status requests of all MADI Bridges via a simple mouse click. Most appealing is the combination Hammerfall DSP MADI and ADI-648. They transmit MIDI directly embedded in MADI, thus allow controlling a MADI Bridge which is located far away from the computer.