Table of contents
Specifications
system type: active 10”, two-way bass reflex design
frequency range: 70 Hz–18 kHz (-3 dB points, “Normal” preset selected)
coverage pattern: 90° H x 60° V nominal
crossover frequency: .8 kHz
system power rating: 250 W continuous, 500 W peak
maximum SPL: 121 dB
nominal impedance: 8 Ohms
LF driver: 200 W continuous at driver impedance
HF driver: 50 W continuous at driver impedance
LF driver size/type: 1 x 10” (25.4 cm), Neodymium magnet with 2.5” voice coil
HF driver size/type: 1 x 1” (2.5 cm), Titanium diaphragm compression driver
high-pass filter: 75 Hz
input: balanced XLR/1/4” TRS combo jack with XLR loop through
pole socket: 36 mm pole mount socket with stabilizing screw
mounting: 5 x M10 suspension points (2 bottom, 2 top, 1 rear)
AC input: 120–240 V, 50/60 Hz
dimensions: (H x W x D) 21.9” x 13.7” x 11.2” (55.6 cm x 34.8 cm x 28.5 cm)
net weight: 25 lbs (11.3 kg)
frequency range: 70 Hz–18 kHz (-3 dB points, “Normal” preset selected)
coverage pattern: 90° H x 60° V nominal
crossover frequency: .8 kHz
system power rating: 250 W continuous, 500 W peak
maximum SPL: 121 dB
nominal impedance: 8 Ohms
LF driver: 200 W continuous at driver impedance
HF driver: 50 W continuous at driver impedance
LF driver size/type: 1 x 10” (25.4 cm), Neodymium magnet with 2.5” voice coil
HF driver size/type: 1 x 1” (2.5 cm), Titanium diaphragm compression driver
high-pass filter: 75 Hz
input: balanced XLR/1/4” TRS combo jack with XLR loop through
pole socket: 36 mm pole mount socket with stabilizing screw
mounting: 5 x M10 suspension points (2 bottom, 2 top, 1 rear)
AC input: 120–240 V, 50/60 Hz
dimensions: (H x W x D) 21.9” x 13.7” x 11.2” (55.6 cm x 34.8 cm x 28.5 cm)
net weight: 25 lbs (11.3 kg)
