|
"The Globe" microphone uses large size dual diaphragm capsule and is designed for detailed and neutral sound - with transparent highs, smooth midrange with minimal presence and close to flat low-end response. It has cardioid polar pattern.
Specifications
- Transducer type: electrostatic
- Operating principal: pressure gradient
- Diaphragms active diameter: 25 mm
- Frequency range: 20 Hz to 20 kHz
- Polar pattern: unidirectional, cardioid
- Output impedance: 50 ohms
- Rated load impedance: 1000 ohms
- Suggested load impedance: > 500 ohms
- Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa
- S/N Ratio CCIR 468-3 weighted: 76 dB
- S/N Ratio DIN/IEC 651 A-weighted: 87 db-A
- Equivalent noise level DIN/IEC A-weighted: 6 dB-A
- Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB
- Dynamic range of the microphone preamplifier: 128 db
- Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
- Current consumption: < 2 mA
- Output connector: 3-pin XLR male, gold plated contacts
- Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
- Dimensions and weight: 220 mm height, 44 mm diameter, weight 350 g
|
