Finger

SocButtons v1.5

Smooth, transparent highs


Violet Design Finger "The Finger" microphone uses medium size, single diaphragm, cardioid pattern capsule and is designed for close to neutral, very detailed sound - with smooth, transparent highs, optimal presence and natural low end response.

Specifications

  • Transducer type: electrostatic
  • Operating principle: pressure gradient
  • Diaphragms active diameter: 13 mm
  • Frequency range: 20 Hz to 20 kHz
  • Polar pattern: unidirectional, cardioid
  • Output impedance: 50 ohms
  • Rated load impedance: 1000 ohms
  • Suggested load impedance: > 500 ohms
  • Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa
  • S/N Ratio CCIR 468-3 weighted: 71 dB
  • S/N Ratio DIN/IEC 651 A-weighted: 82 db-A
  • Equivalent noise level DIN/IEC A-weighted: 12 dB-A
  • Maximum SPL for 0.5% THD at 1000 ohm load: 140 dB
  • Dynamic range of the microphone preamplifier: 128 dB
  • Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
  • Current consumption: < 2 mA
  • Output connector: 3-pin XLR male, gold plated contacts
  • Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
  • Dimensions and weight: 207 mm length x 24 mm shaft diameter, 200 g