Black Knight

SocButtons v1.5

Designed for detailed and neutral sound


Violet Design Black Knight “THE BLACK KNIGHT” uses large size dual diaphragm capsule and is designed for detailed and neutral sound - with transparent highs, smooth midrange with minimal presence and close to flat low-end response. It has unidirectional cardioid polar pattern.

Specifications

  • Transducer type: electrostatic
  • Operating principle: pressure gradient
  • Diaphragm's active diameter: 27 mm
  • Frequency range: 20 Hz to 20 kHz
  • Polar pattern: unidirectional - cardioid
  • Output impedance: 50 ohms
  • Rated load impedance: 1000 ohms
  • Suggested load impedance: >500 ohms
  • Sensitivity at 1000 Hz into 1000 ohms load: 33 mV/Pa
  • S/N Ratio CCIR 468-3 weighted: 76.5 dB
  • S/N Ratio DIN/IEC 651 A-weighted: 87.5 dB-A
  • Equivalent noise level DIN/IEC A-weighted: 6,5 dB-A
  • Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB
  • Dynamic range of the internal preamplifier: 128 dB
  • Phantom powering voltage on pins #2 & #3 of XLR: +48 V (+/-4 V)
  • Current consumption: <2 mA
  • Output connector: 3-pin XLR male, gold plated contacts
  • Signal polarity: toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
  • Dimensions: 208 mm x 44 mm
  • Weight: 450 g