|
"The Amethyst" Standard uses single diaphragm capsule and is designed for what we know as the modern sound - with airy highs, extended vocal presence, accented low end response and unidirectional cardioid pattern. "The Amethyst" Vintage uses dual diaphragm capsule and is designed for that classic warm sound we know from the best vintage microphones. It has a little bit wider cardioid polar pattern.
Specifications
- Transducer type: electrostatic
- Operating principle: pressure gradient
- The diaphragms active diameter: 25 mm (1")
- Frequency range: 20 Hz to 20 kHz
- Polar pattern: unidirectional, cardioid
- Output impedance: 50 ohms
- Rated load impedance: 1000 ohms
- Suggested load impedance: > 500 ohms
- Sensitivity at 1000 Hz into 1000 ohms load: 21 mV/Pa
- S/N Ratio CCIR 468-3 weighted: 76 dB
- S/N Ratio DIN/IEC 651 A-weighted: 87 db-A
- Equivalent noise level DIN/IEC A-weighted: 7 dB-A
- Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB
- Dynamic range of the microphone preamplifie: 127 db
- Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
- Current consumption: < 2 mA
- Output connector: 3-pin XLR male, gold plated contacts
- Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
- Dimensions and weight: 168 x 63 x 41 mm, 350 grams
|
